Lifting Loops
Wire Rope Lifting Loops
While some manufacturers boost there lifting loops are approximately 4:1 safety ratio, they use low grade fiber core or electro-plated cable. TL Manufacturer Inc provides you with a true 4:1 lifting loop made from dipped galvanized cable.
Our lifting loops were designed to be used in rebar reinforced concrete. All lifters should be installed with reinforcement running through the loop. This will ensure you are properly lifting using your reforcing mat not just the few inches of concrete surrounding the lifter.
For safety always observe proper lifting angles, equal insertion depths, use only proper lifting hooks with safety latches, and never swing, impact or bounce loads or carry across rough terrian while load is suspended with lifting loops. Violating any of these precautions may result in failure.
Item no. |
|
Tag color |
|
Static working load |
BS 1/4 |
|
Red |
|
1900 lbs |
BS 5/16 |
|
Purple |
|
2600 lbs |
BS 3/8 |
|
Green |
|
3300 lbs |
BL 1/2 |
|
White |
|
8500 lbs |
BL 5/8 |
|
Aqua |
|
12500 lbs |
BL 3/4 |
|
Green |
|
20000 lbs |
BL 1 |
|
Yellow |
|
32000 lbs |
RC 19.5 |
|
N/A |
|
3300 lb Recon Retaining Block Loop |
RR 24 |
|
N/A |
|
2600 lb Redi-Rock Retaining Block Loop |
RR 36 |
|
N/A |
|
2600 lb Redi-Rock Retaining Block Loop |
3/8C |
|
Green |
|
3300 lb Special Coated Loop |
1/2C |
|
Blue |
|
8500 lb Special Coated Loop |
COMMON USE FOR THE LIFTING LOOP
LARGE HEADWALL LIFTERS
On larger structures such as headwalls - TL Manufacturing has created a unique lifter for deeper embedded to ensure lifting security and peace of mind. REBAR reinforce is required with all wire rope lifters.
CLE-T |
|
3/4 |
|
20000 lb capacity |
CLE-T |
|
1 |
|
32000 lb capacity |
|
